Change the batteries% Check that you have the adapter plugged in to the correct jack on the module.% Make sure the wires are not tangled around telescoping or moving parts.% Make sure all connections are tight and secure.% If you are using sound activation, make sure the switch is set to ‘On’% If you are using a footpad for activation, make sure the switch is set to ‘footpad’

There is a VOLUME CONTROL knob located on the top of the module, near the MIT and Footpad jacks. Turn the knob to adjust the sound to the desired level.

Make sure you set the item up on level ground.% Make sure there are no obstructions in the surrounding area of the item so that the item has enough room to function.

The adapter must be a 6V/2A DC adapter% We recommend that you purchase this adapter through our website (www.getcoolstuff.com) to ensure that the adapter tip fits correctly, and that the adapter is not too weak or too strong for the item% Take the batteries out while you are using the adapter