This item can be used in a covered outdoor setting, but it should be brought indoors during bad weather. For year-round display, we recommend using it indoors as per the packaging.

You can put together as many band members as you would like via Bluetooth, as long as one member is selected as "leader" and the rest are "followers." There is a wire that connects all the members together, and a switch that indicates the follower/leader positions.

The maximum distance that the motion sensor will detect motion is about 6 feet.

Turn both the prop and your Bluetooth device on and make sure they are in range of each other. Go to the Bluetooth settings on your device and select "REAPER BAND." There will be a chime that comes from your prop indicating that it is connected to your Bluetooth device. When you start playing music, the prop will activate! 

Ensure that you have your batteries inserted with the correct polarity (-/+), that your prop is turned on, and that there are no obstructions in front of the motion sensor. If your prop still will not activate, please do not hesitate to contact support@tekkytoys.com and we will assist you.

Ensure that the part that isn’t lighting is connected properly to the control box. If using batteries, ensure that you’re using fresh alkaline batteries. If using an adapter, ensure that it is completely/correctly connected. (We recommend using your adapter opposed to batteries for troubleshooting.) If the lights still don’t work, contact us via support@tekkytoys.com and we will assist you. 

If you are using batteries, ensure that you have fresh alkaline batteries in your prop. If you’re using an adapter, ensure that it is plugged in fully/correctly. Check to see if anything is obstructed by wires, clothing, etc. Try disconnecting all of the wires and connect them again. If the part still isn’t working, contact us via support@tekkytoys.com.